Servo Cable
ÖLFLEX® SERVO FD 796 CP servo motor cables are typically used for interconnection between servo drive controllers.
Three-phase – synchronous or asynchronous servo-engines of well-known manufacturers of drive systems.
SPECIFICATION
TECHNICAL DATA
SPECIFICATION
Design according to UL AWM 758, Style 20234 and based on HD 22.10 S2 resp. VDE 0282-10. Conductor extra fine wire strands of bare copper, core insulation Polypropylene, dependant on design power cores with or without one pair or two control cores arranged as pairs, non-woven wrapping, screen braid of tinned copper wires, coverage = 85% (nominal value), outer sheath orange polyurethane compound.
TECHNICAL DATA
Nominal voltage: U 0 /U: 600/1000 V, UL/CSA: max. 1000 V
Test voltage: Core/Core: 4000 V AC
Core/Screen: 4000 V AC
Screen/screen: 500 V AC
Transfer impedance at 30 MHz: max. 300 mΩ/m
Min. bending radius: flexing < 16 mm²: 7.5 x cable diameter
flexing > 25 mm²: 10 x cable diameter
fixed installation: 4 x cable diameter
Temperature range: flexing: -40 °C up to +80 °C max. conductor temp.
fixed installation: -50 °C up to +80 °C max. conductor temp.
Oil resistance: acc. to EN 50363-10-2 resp. VDE 0207-363-10-2
Note: Please follow manufacturer datasheets and guidelines for cable usage and installation.
For further assistance,
please reach out to a member of the Phoenix Sales Team.